姓 名 | 齐凤升 | 性 别 | 男 |
出生年月 | 1980年1月 | 政治面貌 | 中共党员 |
职 称 | 副教授 | 职 务 | 热能工程系副主任 |
办公电话 | 024-83680861 | ||
电子邮箱 | qifs@mail.neu.edu.cn | ||
学习工作经历: 工作经历: 2016.01-至今,东北大学,冶金学院,副教授 2009.7-2015.12: 东北大学材料与冶金学院,讲师 2009.8-2010.11:澳大利亚皇家理工大学(RMIT),博士后,导师:Jiyuan Tu 2005.3-2008.3:东北大学材料与冶金学院,助教 学习经历: 2005.3-2009.7:东北大学热能与动力工程专业,博士研究生,导师:陈海耿 2002.9-2005.2:东北大学热能与动力工程专业,硕士研究生,导师:李宝宽 1998.9-2002.7:东北大学热能与动力工程专业,本科生 | |||
主要研究方向:炉外精炼;工业炉窑热工与燃烧技术;智能化流动与虚拟仿真 | |||
近年讲授课程:流动与传热过程数值计算基础;供热通风及空调工程 | |||
所在团队情况:工程热物理研究所 | |||
人才培养情况:独立指导研究生13名;协助指导博士生5名 | |||
科研项目情况: 主持国家、省部级及企业项目12项;参加科研项目14项。部分主持项目如下: 1.国家自然科学基金面上项目:真空吹氧喷溅精炼超低碳钢的基础研究。批准号:52174305,2022/01–2025/12,58万元。 2.国家自然科学基金国际合作交流项目—外国青年学者研究基金:Multi-group Stochastic Modeling of Population Balance of Gas-liquid Flows for Nuclear Safety Analysis。批准号:51450110083,2014/7-2015/6,20万元。 3.国家自然科学基金青年项目:高洁净钢循环真空脱气精炼工艺中二次稀薄燃烧行为及热补偿研究。批准号:51004029,2011/1–2013/12, 20万元。 4.电熔镁炉内磁-热-流多耦合模拟研究。委托方:中国科学院沈阳计算机技术研究所有限公司,合同编号2021021800124,2021/5-2021/12, 30万元。 5.新型高风温顶燃式热风炉热工过程优化及智能控制。委托方:山东省冶金设计院股份有限公司,合同编号:2021021800021,2021/3-2022/8, 30万元。 6.顶燃式热风炉热工系统的优化与改进。委托方:山东省冶金设计院股份有限公司,合同编号:20120102039,2012/3-2012/8, 18万元。 7.新型厚料层含铁尘泥转底炉直接还原过程数值模拟研究。委托方:钢铁研究总院,合同编号:2019021800102,2019/9-2020/9, 15万元。 | |||
论文著作情况: 在《International Journal of Multiphase Flow》、《International Journal of Heat and Mass Transfer》、《Metallurgical and Materials Transactions B》、《ISIJ International》和《金属学报》等国内外杂志、会议共发表学术论文100余篇,其中SCI收录28篇。 代表性论文如下: [1]F.S. Qi, G.H. Yeoh, S.C.P. Cheung, J.Y. Tu, E. Krepper, D. Lucas. Classification of Bubbles in Vertical Gas-liquid Flow: Part 1-An Analysis of Experimental Data. International Journal of Multiphase Flow, 2012, vol.39, pp:121-134. (SCI,EI) [2]Fengsheng Qi, Jinxin Liu, Zhongqiu Liu, Sherman C. P. Cheung, Baokuan Li .Characterization of the Mixing Flow Structure of Molten Steel in a Single Snorkel Vacuum Refining Furnace. Metals, 2019, vol.9,pp:1-15.(SCI) [3]Fengsheng Qi, Jianbiao Shan, Baokuan Li, Jakov Baleta. Numerical Study on Ladle Baking Process of Oxy-fuel Combustion. THERMAL SCIENCE, 2020, Vol. 24, No. 6A, pp. 3511-3520. (SCI) [4]Fengsheng Qi, Wang Zisong, Li Baokuan, He Zhu, Baleta Jakov, Vujanović Milan. Numerical study on characteristics of combustion and pollutant formation in a reheating furnace. Thermal Science, 2018 22(5):2103-2112(SCI) [5]Fengsheng Qi,Liu Yang, Baokuan Li and Fumitaka Tsukihashi: Study of Argon/Molten Steel Two-Phase Flow in Refining of High Clean Steel Using Two-Fluid Model. Journal of Iron and Steel Research int. 2011, vol.78, Supplement 2, pp.176-181.(SCI) [6]Fengsheng Qi,Baokuan Li and Fumitaka Tsukihashi: Behaviors of Argon Gas Bubbles in Electromagnetic Driven Swirling Flow, Steel Research int. 2007, vol.78, No.5, pp.409-412.(SCI,EI) [7]Wang, Q; Jia, SY; Qi, FS; Li, GQ; Li, YW; Wang, T; He, Z. A CFD Study on Refractory Wear in RH Degassing Process. ISIJ INTERNATIONAL, Vol.60, NO. 9, pp:1938-1947,2020. [8]Wang, Qiang; Qi, Fengsheng; He, Zhu; Li, Yawei; Li, Guangqiang. Effect of graphite content and heating temperature on carbon pick-up of ultra-low-carbon steel from magnesia-carbon refractory using CFD modelling[J].International Journal of Heat and Mass Transfer, May 2018, Vol.120, pp.86-94(SCI) [9]Zhongqiu Liu, Fengsheng Qi, Baokuan Li, S.C.P. Cheung. Modeling of bubble behaviors and size distribution in a slab continuous casting mold[J]. International Journal of Multiphase Flow, 2016, 79: 190–201. [10]Zhongqiu Liu, Linmin Li, Fengsheng Qi, Baokuan Li, Maofa Jiang, Fumitaka Tsukihashi. Population Balance Modeling of Polydispersity Bubbly Flow in Continuous-Casting Using Multiple-Size-Group Approach [J]. Metallurgical and Materials Transactions B. 2015, 46(1): 406-420.(SCI) [11]Zhongqiu Liu, Fengsheng Qi, Baokuan Li, Maofa Jiang. Multiple Size Group Modeling of Polydispersed Bubbly Flow in the Mold: An Analysis of Turbulence and Interfacial Force Models [J]. Metallurgical and Materials Transactions B, 2015, 46(2): 933-952.(SCI) [12]S.C.P. Cheung, G.H. Yeoh, F.S. Qi, J.Y. Tu. Classification of Bubbles in Vertical Gas-liquid Flow: Part 2- A model evaluation. International Journal of Multiphase Flow, 2012, vol.39, pp:135-147. (SCI,EI) [13]李宝宽, 刘中秋, 齐凤升, 王芳, 徐国栋. 薄板坯连铸结晶器非稳态湍流大涡模拟研究, 金属学报, 2012, 48(1): 23-32. (Index:SCI) [14]李宝宽,代凤羽,齐凤升,杨冉。双水口注流连铸复合钢坯结晶器流场和合金元素浓度场研究。金属学报,vol.46, No.6, 2010, pp.736-742. (SCI,EI) | |||
科研奖励: 1.辽宁省自然科学二等奖。第二完成人:钢精炼与连铸工艺中流动理论与应用模型,2006. 2.沈阳市高层次人才“拔尖人才”称号,2017 | |||
个人寄语:力求极致,止于至善! |