张红伟

作者:发布时间:2019-01-18浏览次数:2891

张红伟

出生年月

1970.11.26

政治面貌

群众

教授

-

办公电话

024-83683985   13504022777

电子邮箱

hongweizhang@epm.neu.edu.cn

学习工作经历:

学习经历

1988.09-1992.07      东北工学院(现东北大学)热能工程专业工学学士

1992.09-1995.03      东北大学热能工程专业工学硕士

1995.03-2001.03      东北大学热能工程专业工学博士

2002.04-2004.07      东北大学冶金工程博士后站博士后

工作经历

2001.03-2004.12      东北大学材料与冶金学院材料电磁过程研究教育部重点实验室讲师

2005.01-2014.12      东北大学材料电磁过程研究教育部重点实验室副教授

2009.01-2009.12      法国巴黎矿大(Ecole   des MINES ParisTech材料成型中心凝固过程组织与性能研究室访问学者

2015.01-   至今东北大学材料电磁过程研究教育部重点实验室教授

主要研究方向:

1.   热物理过程流动、传热、传质耦合模拟;

2.   合金宏观/微观偏析、碳化物析出预测与控制;

3.   合金相变路径热力学及动力学计算;

4.   合金凝固组织预测及控制。

近年讲授课程:

1.   传热学(本科生);

2.   新能源传输模拟及仿真(本科生);

3.    热工基础(本科生);

4.   工程传热(硕士生);

5.   高等流体力学(II)(硕士生);

6.   工程热物理实用数值技术(硕士生)

所在团队情况:新能源转换材料研究所成员

人才培养情况:

2021年底,指导本科生毕业设计45名,硕士研究生32名(毕业26名)、协助指导博士生2名(毕业1名)。

在读硕士生

2021孙乐勤(动力工程)

2020殷鹏博(工程热物理)    董士虎(动力工程)

2019吕文朋(工程热物理)    田震(动力工程)    唐国峰(动力工程)

已毕业硕士生

20216月毕业苗淼(动力工程)    冯苗苗(动力工程)    张山(动力工程)    董正洋(动力工程)  

201912月毕业邵景霞(工程热物理)    张晛韦(动力工程)    陈红(动力工程)

201812月毕业张光旭(动力工程)

201712月毕业吕东旭(工程热物理)    韩旭(动力工程)    高绍绍(动力工程)

201612月毕业于忠婷(材料加工)    苏盟盟(动力工程)    梁涧飞(动力工程)

20156月毕业李轶伦(材料加工)    付嘉宝(工程热物理)

20146月毕业刘敏(材料工程)    王天龙(工程热物理)

20136月毕业姜洁(材料工程)    李铁(工程热物理)

20126月毕业张倩(材料加工)    吴丙根(热能工程)

20106月毕业江兴(热能工程)

20096月毕业王亚东(材料学)

20083月毕业邢伟(材料加工)     6月毕业韩福龙(材料加工)

科研项目情况:

共主持项目7项,其中国家、省部级项目5项,主要参加国家级基金及横向项目5项。主要研究项目有:

- 国家自然科学基金面上项目(2016-2019- Fe-C-Cr基多元高熵结构合金凝固路径与碳化物析出行为研究(负责人)

- 辽宁省教育厅人才项目(2015-2018- 基于类平衡/有限扩散偏析模型的Fe-C-Cr基多元合金凝固路径预测与碳化物析出控制(负责人)

- 东北大学学术会议资助(2016-2016- 承办第4届凝固、铸造及精炼过程数值模拟前沿技术国际会议(负责人)

- EPM实验室开放基金(2015-2016- 铸坯凝固组织动态预测、晶体生长动力学表征及控制(负责人)

- 高校2014引智项目(2014-2015- 基于有限扩散偏析模型的Fe-C-Cr基多元合金凝固路径预测与碳化物析出控制 (负责人)

- 中央高校基本科研业务费(2011-2012- Fe-C-Cr基多元合金凝固路径及凝固组织预测与控制(负责人)

- 辽宁省自然基金(2008-2009- 强磁场作用下合金凝固组织的演变与控制(负责人)

- 辽宁省博士启动基金(2004-2005) - Fe-C合金连铸坯于电磁场作用下凝固组织演变的研究(负责人)

- 高等学校创新引智计划(国家111计划)2007-2014电磁冶金与强磁场材料科学与技术创新引智基地(主要参加)

- 国家基础研究发展规划(973计划)项目(1999-2003新一代钢铁材料的重大基础研究—电磁场及其它外场对提高钢材料质量的作用(主要参加)

- 朝阳钢铁横向(2016-2017中薄板低能耗生产技术(主要参加)

- 北满特钢横向(2014-2015-  高品质特殊钢方坯偏析和疏松的控制(主要参加)

- 大连特钢小型材分公司横向(2012-2013-  三流连铸机中间包新装置研发(主要参加)

论文著作:

202112月,在   Steel Res Int, ISIJ Inter, J Iron Steel Res Int, 金属学报,物理学报,中国有色金属学报等国内外一级期刊及国际会议上发表学术论文60余篇。合作编写学术专著1部,参编学术专著2部。

专著

赫冀成,雷洪、王强等著:《计算冶金学》(撰写第7),科学出版社,2019.11.

雷洪,张红伟:结晶器冶金过程模拟》,冶金工业出版社,2014.11.

翁宇庆主编:《超细晶钢-钢的组织细化理论与控制技术》(撰写第5篇第33.3),冶金工业出版社,2003.9.

期刊论文

冯苗苗,张红伟,邵景霞,李铁,雷洪,王强耦合热力学凝固路径预测Fe-C包晶合金宏观偏析,金属学报,202157(8):1057-1072. (SCI)

张山张红伟, 苗淼, 冯苗苗, 雷洪王强. Cr铸铁中M7C3碳化物与奥氏体共生长的元胞自动机模拟,物理学报, 2021, 70(21)218102. (SCI)

             Weixian Wang, Hongwei Zhang, Keiji Nakajima,    Hong Lei, Guofeng Tang, Xinghua Wang, Wangzhong Mu and Maofa Jiang.   Prediction of final solidification position in continuous casting bearing   steel billets by slice moving method combined with Kobayashi approximation   and considering MnS and Fe3P precipitation, ISIJ international,   2021, 61 (11)2703-2714. (SCI)

张晛韦,张红伟,雷洪,王强. 球墨铸铁离异共晶凝固组织生长模拟, 钢铁研究学报(中文版),202032 (9): 816-825.

Hongwei   Zhang, Keiji Nakajima, Mengmeng Su, Hiroyuki Shibata, Peter Hedström,   Weixian Wang, Hong Lei, Qiang Wang, Pär Göran Jönsson, Jicheng He. Prediction   of Influences of Co, Ni and W Elements on Carbide Precipitation Behavior in   Fe-C-V-Cr-Mo Based High Speed Steels, Steel research int. 2018,   89(10):1800172.  (SCI)

Hongwei Zhang, Qiang Liu,   Hiroyuki Shibata, Qiang Wang, Pär Jönsson, Jicheng He, Keiji NakajimaPartial   Equilibrium Prediction of Solidification and Carbide Precipitation   in Ti-added High Cr Cast IronsISIJ International, 2014, 54(2),   374-383.   (SCI)

Hongwei Zhang,   Keiji Nakajima, Charles‑André Gandin and Jicheng He:   Prediction of carbide precipitation using Partial equilibrium approximation   in Fe-C-V-W-Cr-Mo high speed steels, ISIJ International, 2013, 53 (3),   493-501.  (SCI)

张红伟,中岛敬治,王恩刚,赫冀成:Al-Si合金宏观偏析、凝固组织演变的元胞自动机-控制容积法耦合模拟中国有色金属学报, 2012, 22(7),1883-96.    (EI)

             Qiang Liu, Hongwei Zhang,   Qiang WANG, Xiangkui ZHOU, Pär JÖNSSON and Keiji NAKAJIMA. Effect of Cooling   Rate and Ti Addition on the Microstructure and Mechanical Properties in   As-cast Condition of Hypereutectic High Chromium Cast IronsISIJ   International, 2012, 52 (12), 22102219.   (SCI)

             Qiang Liu, Peter HEDSTRÖM, Hongwei Zhang,   Qiang WANG, Pär JÖNSSON and Keiji NAKAJIMA. Effect of Heat Treatment on   Microstructure and Mechanical Properties of Ti-alloyed Hypereutectic High   Chromium Cast Iron, ISIJ International, 2012, 52 (12), 22882294.   (SCI)

H. Zhang, Ch.-A. Gandin, H. Ben   Hamouda, D. Tourret, K. Nakajima, J. HePrediction of   solidification paths for Fe-C-Cr alloys by a multiphase segregation model   coupled to thermodynamic equilibrium calculationsISIJ   International, 50 (2010): 1859-1866.   (SCI)

H. Zhang, K. Nakajima, H. Lei, J.   HeRestrictions of physical properties on solidification   microstructures of Al-based binary alloys by Cellular AutomatonISIJ   International, 50 ( 2010): 1835-1842.   (SCI)

             K. Nakajima, H. Zhang, K.   Oikawa, M. Ohno and P.G.JonssonMethodological progress for computer   simulation of solidification and casting (Review)ISIJ   International, 50 (2010): 1724-1734.    (SCI)

 Hongwei Zhang, Keiji Nakajima,   Rangqiong Wu, Qiang Wang and Jicheng HePrediction of   solidification microstructure and columnar-to-equiaxed transition of Al-Si   alloy by two-dimensional cellular automaton with decentred   squaregrowth algorithmISIJ International, 49 (2009):   1000-1009.   (SCI)

Hongwei Zhang, Keiji Nakajima,   Wei Xing, Aili Wang and Jicheng He: Influences of flow intensity, cooling   rate and nucleation density at ingot surface on deflective growth of dendrites   for Al-based alloy, ISIJ International, 49 (2009):   1010-1018.   (SCI)

Zhang Hong-wei, Wang En-gang, He   Ji-cheng, Influence of billet size on flow, solidification and solute   transport in continuous casting, Journal of Iron and steel research   International,  10(2003): 22-27.    (SCI)

张红伟王恩刚赫冀成方坯连铸过程中钢液流动、凝固及溶质分布的耦合数值模拟.金属学报,38(2002): 99-104.   (SCI)

张红伟王恩刚赫冀成高碳钢连铸坯凝固过程溶质偏析的数值模拟东北大学学报,23(2002): 549-552. (EI)

张红伟赫冀成王恩刚连铸坯截面尺寸对流动、凝固及溶质分布的影响东北大学学报,23(2002): 236-239. (EI)

张红伟,李宝宽,王红,赫冀成凝固糊状区渗透率的修正模型东北大学学报,19(1998),   S1: 196-199

张红伟,李宝宽,王红,赫冀成偏流浇注对圆坯结晶器凝固过程的影响东北大学学报,19(1998),   S1: 204-207

国际会议邀请报告

H. Zhang, H. Ben Hamouda, D. Tourret,   Ch.-A. Gandin, K. Nakajima, J. HePrediction of solidification path for   multicomponent alloys by a multiphase segregation modelthe 2nd   international symposium on cutting edge of computer simulation of   solidification and casting (CSSC2010), February 3-5, Sapporo, Japan, 201047. invited   lecture

H. Zhang, K. Nakajima, J. HeRestriction   of nucleation, flow parameter and physical property on solidification   microstructure of Al-based binary alloy by cellular automatonthe 2nd   international symposium on cutting edge of computer simulation of   solidification and casting (CSSC2010), February 3-5, Sapporo, Japan, 201050-51. invited   lecture

国际会议论文集

H W Zhang, S Zhang, Y C Wang, Y Z Hao,   M Miao, K Nakajima, H Lei, Q Wang, and J C He.  Cellular automaton   modeling of M7C3 carbide growth during solidification of Fe-C-Cr alloy, IOP   Conference Series: Materials Science and Engineering, 2020,   861: 012046. (EI)

Hongwei Zhang, Keiji Nakajima, Mengmeng   Su, Shaoshao Gao, Hong Lei, Qiang Wang, Jicheng He. Prediction of Carbide   Precipitation Using A Combined Partial Equilibrium - Para-Equilibrium - Lever   Rule Approximation in Automobile Gear Materials, IOP Conf. Ser.: Mater. Sci.   Eng. 2019, 529: 012009. (EI)

Hongwei Zhang,   Keiji Nakajima, Engang Wang and Jicheng He: Modeling of   macrosegregation and solidification microstructure for Al-Si alloy by a   coupled cellular automaton  finite volume model, MCWASP XIII 2012,   2012 IOP Conf. Ser.: Mater. Sci. Eng. 33, 012093.  (EI)

Hongwei Zhang, Charles‑André Gandin,   Jicheng He and Keiji Nakajima: Prediction of solidification path   and carbide precipitation in Fe-C-V-Cr-Mo-W high speed steels, MCWASP XIII   2012, 2012 IOP Conf. Ser.: Mater. Sci. Eng. 33, 012061.  (EI)

Hongwei Zhang,   Charles‑André Gandin, Keiji Nakajima and Jicheng He:   A multiphase segregation model for multicomponent alloys with a peritectic   transformation, MCWASP XIII 2012, 2012 IOP Conference Series: Materials   Science Engineering, 33, 012063.  (EI)

ZHANGHong-wei,   JIANG Xing,  HE Ji-chengModeling of orientation and alignment of   primary Al3Ni crystal in Al-Ni alloy by imposing a high magnetic fieldJournal of   iron and steel research international. 2012, 19 (supplement 1), 1095-1098.

             Qiang Liu, Hongwei Zhang,   Qiang Wang, Xiangkui Zhou, Pär G Jönsson and Keiji Nakajima: Solidification   and phase transformations of Ti-added hypereutectic high chromium cast ironsProceedings   of 1st International Conference on Ingot Casting, Rolling and Forging, 1-7.   Aachen, Germany, June 5, 2012.

Zhang Hongwei, Keiji Nakajima,   Wang Qiang, Liu Tie, Xing wei, He Jicheng: Cellular Automaton Modeling of   Solidification Microstructure of Al-Si Alloy, The 7th Pacific Rim   International Conference on Modeling of Casting and Solidification   Processes  (Proceedings: Recent development of modeling of casting and   Solidification Processes), Aug. 19-22, Dalian, China, 2007: 233-240.

Zhang Hongwei, Keiji Nakajima,   Wang Qiang, Xing wei, Liu Tie, He Jicheng: Modeling of solidification   microstructure for alloys by using cellular automaton, international   symposium on liquid metal processing and casting (LMPC), Sept.2-5, Nancy,   France, 2007: 201-205.  

Zhang Hong-wei, Huang Jun-tao,   Wang En-gang, He Ji-cheng, Su Xin. Numerical simulation on solidification   processes of continuous casting billet with linear electromagnetic   stirring, Second international conference on advanced structural steels   (ICASS 2004)shanghai2004: 947-950.

Zhang Hong-wei, Huang Jun-tao,   Wang En-gang, Su Xin, He Ji-cheng. Numerical Simulation for Effects of   Electromagnetic Stirring on Solidification Processes of Continuous Casting   BilletProceedings: Asia-Euro Workshop on Electromagnetic   Processing of MaterialsShenyang2004: 147-154.

Zhang hongewei, Wang engang, He   Jicheng. Numerical simulation on fluid flow, solidification and solute   transport in billet continuous casting process. Workshop on new generation   steel (NG STEEL' 2001) (新一代钢铁材料研讨会论文集),北京,2001216-221

国际会议发表

H W Zhang, S Zhang, Y C Wang, Y Z Hao, M   Miao, K Nakajima, H Lei, Q Wang, and J C He.  Cellular automaton   modeling of M7C3 carbide growth during solidification of Fe-C-Cr alloy,   MCWASP XV: International Conference on Modelling of Casting,   Welding and Advanced Solidification Processes, 22-23 June   2020, Jonkoping, Sweden. (Online)

Hongwei Zhang, Keiji Nakajima, Mengmeng Su,   Shaoshao Gao, Hong Lei, Qiang Wang, Jicheng He. Prediction of Carbide Precipitation   Using A Combined Partial Equilibrium- Para-Equilibrium - Lever Rule   Approximation in Automobile Gear Materials, ICASP-5  CSSCR-5   conference, June 17-21, 2019 Salzburg, Austria.

Hongwei Zhang, Keiji Nakajima, Hong   Lei, Jicheng He: Study of Macrosegregation Formation during Solidification of   Alloys, The 4th International Symposium on Cutting Edge of Computer   Simulation of Solidification, Casting and Refining (CSSCR2016), Xi'an, China,   May 11 - 15, 2016: 153-154 (CSSCR2016 Best Poster Award).

             Mengmeng Su, Hongwei Zhang,   Weixian Wang, Keiji Nakajima, Hong Lei, Jicheng He: Prediction of Influences   of Alloy Elements on Precipitation Behavior of Carbides in Solidification of   High Speed Steels, The 4th International Symposium on Cutting Edge of   Computer Simulation of Solidification, Casting and Refining (CSSCR2016), Xian , China,   May 11 - 15, 2016: 126-127.

             Zhongting Yu, Yilun Li, Jianrong Gao, Hongwei   Zhang: Liquid-Liquid Phase Separation in Binary Immiscible Alloy by   Lattice Boltzmann Method, The 4th International Symposium on Cutting Edge of   Computer Simulation of Solidification, Casting and Refining (CSSCR2016), Xian , China,   May 11 - 15, 2016: 129-130.

Hongwei Zhang, Jie Jiang, Keiji   Nakajima, Jicheng He: Deflective Dendrite Growth of Fe-C Based Ternary Alloy   under Fluid Flow, 3rd International Symposium on Cutting Edge of Computer   Simulation of Solidification, Casting and Refining (CSSCR2013), Aalto   univer., Finland & KTHSweden, May 20-23, 201341.

Hongwei Zhang, Tie Li, Keiji   Nakajima, Engang Wang, Jicheng He: Effects of Thermo-Solutal Buoyancy on   Macrosegregation Formation during Solidification of Binary Alloys, 3rd   International Symposium on Cutting Edge of Computer Simulation of Solidification,   Casting and Refining (CSSCR2013), Aalto univer., Finland & KTHSweden, May   20-23, 201333.

Hongwei Zhang,   Keiji Nakajima, Charles‑André Gandin, and Jicheng He:   Prediction of Carbide Precipitation Using Partial Equilibrium Approximation   in Fe-C-V-W-Cr-Mo High Speed Steels, 3rd International Symposium on Cutting   Edge of Computer Simulation of Solidification, Casting and Refining   (CSSCR2013), Aalto univer., Finland & KTHSweden, May 20-23,   2013118-119.

教学奖励:

2014年度东北大学材冶学院学生工作先进个人

科研奖励:

2011年辽宁省自然科学学术成果一等奖,采用二维元胞自动机模型及偏心生长算子预测Al-Si合金凝固组织和柱状晶/等轴晶转变,第一申报人

2012年辽宁省自然科学学术成果三等奖,“Al基二元合金物性参数制约其凝固生长及形貌的元胞自动机模拟,第一申报人

2013年辽宁省自然科学学术成果三等奖,采用偏平衡模型预测Fe-C-V-W-Cr-Mo高速钢凝固过程中碳化物的析出,第一申报人

2014年度中国有色金属学报优秀学术论文奖,“Al-Si合金宏观偏析、凝固组织演变的元胞自动机-控制容积法耦合模拟,第一作者

社会兼职:

中国电工技术学会电热专业委员会委员

个人寄语:

天道酬勤不忘初心


地址:辽宁省沈阳市和平区文化路三号巷11号 | 邮编:110819
电话:024-83687750 传真:024-23906316